Assembly Search / Details

The Central roofing reference did not realize any kind of tests and the results mentioned here, either it has carried out checks for accuracy. It offers no guarantee in that regard.

Each issued resistance result represents a specific assembly of a dynamic test laboratory ISO 17025 recognized and accredited according to the requirements of CSA A123.21.

The results should be read, seen and used in their entirety without any changes or substitutions of products or methods.

For equity products, no substitution or other change can not be done without a rigorous analysis according to specific requirements and validated by the Central roofing reference.

The optional products are optional; they do not affect in any way the result insofar as the anchor method is followed.

All terms used in this document such as "Ribbons" are terms that are part of the product technical reference and use in standard testing studied.

All the assembly data represent dynamic test results of roofing systems assembly; the assembly sheets are valid as per the manfacturer technical department keep those active and or, re-evaluations are planned to revise from the original date of the test.

It must be calculating -0.1 kPa (-0.015 psi) as the weaker result, everything bellows like -0.2 kPa (-0.03 psi) are stronger uplift wind resistance.

The Central Roofing Reference can not be held liable for any claim by the manufacturer in relation to the identification and CSA reserves the right to remove without notice and the specifications of the assembly.

This technical data assembly sheet is produce by Central Roof Reference, with copyright and subject to the Quebec legislation. All readers of this data sheet must insure themselves that she’s up to date and that she’s wasn’t avoid nether replace by a recent one. To validate, you must consult the Central Roof Reference website http://www.crt-csa.ca or to communicate with us by mail at info@crt-csa.ca

Please, checkmark the products you want and click the button to generate the pdf with your chosen products only.

Generate The PDF

Minimal Pressure Rate

Security Factor	Observed On Test
-1.6 KPA ( -33 PSF )	-2.4 KPA ( -49.5 PSF )

Assembly Characteristics

Roof System	System Type	Deck Type
MONO	AARS	Steel

Assembly Specifications

Cap Sheet Membrane (Required)

	Carlisle	TPO - Sure-Weld Fleeceback RL

Attachment Pattern
	Carlisle	Rapid-Lock hook and loop attachment system powered by VELCRO® Brand Securable Solutions	Fully Adhered

Cover Board (Required)

	Carlisle	SecurShield HD RL

Attachment Pattern
	Carlisle	Fast 100 LV 1'' Ribbons/Cordons 6'' o.c.	Adhered
	Carlisle	Fast Dual Cartridge Adhesive 1'' Ribbons/Cordons 6'' o.c.	Adhered
	Carlisle	Flexible Fast Adhesive 1'' Ribbons/Cordons 6'' o.c.	Adhered

Base Insulation (Required)

	Carlisle	InsulBase Polyiso

Attachment Pattern

	Carlisle	Polyiso HP-H 25mm (1’’) à 203.2 mm (8’’)

Attachment Pattern
		#12 screw with round insulation plates 3" 1 screw per 0.372 m2 (4 ft.sq.)	Mechanically Attached

	Carlisle	SecurShield 25mm (1’’) à 203.2 mm (8’’)

Attachment Pattern
	Generic	#12 pre-assembled 3" plates 1 screw/vis per/par .372 m2 (4' ca.)	Mechanically Attached

	Carlisle	SecurShield HD Composite 25mm (1’’) à 203.2 mm (8’’)

Attachment Pattern
	Carlisle	Fast 100 LV 1'' Ribbons/Cordons 6'' o.c.	Adhered
	Carlisle	Flexible Fast Adhesive 1'' Ribbons/Cordons 6'' o.c.	Adhered
	Carlisle	Fast Dual Cartridge Adhesive 1'' Ribbons/Cordons 6'' o.c.	Adhered

Vapor Barrier (Required)

	Carlisle	VapAir Seal 725 TR

Attachment Pattern
		Self-adhered / Auto collante CAC-GRIP LOW-VOC primer on top flanges	Fully Adhered

Thermal Barrier (Optional)

	Georgia-Pacific Gypsum	DensDeck Prime 1200 mm x 2440 mm x 6.4 mm (4' x 8' x 1/4")

Attachment Pattern
	Generic	Loose laid / en indépendance	Independance
	Generic	See manufacturer / Voir manufacturier	Adhered
	Generic	See manufacturer / Voir manufacturier	Mechanically Attached

	CGC/USG	Securock Gypsum Fiber Roof Board 6.3 mm (1/4") - 17.9 mm (5/8")

Attachment Pattern
	Carlisle	Fast 100 LV 1'' Ribbons/Cordons 6'' o.c.	Adhered
	Carlisle	Fast Dual Cartridge Adhesive 1'' Ribbons/Cordons 6'' o.c.	Adhered
	Carlisle	Flexible Fast Adhesive 1'' Ribbons/Cordons 6'' o.c.	Adhered

Decking (Required)

	Generic	Steel min. 22 MSG and min. yield strength 40 ksi