Product Manufacturer Results Reset Search


1365-A- BUR All Adhered -asphalt

Assembly Owner: BP Canada Corp.

Terms and Conditions

The Central roofing reference did not realize any kind of tests and the results mentioned here, either it has carried out checks for accuracy. It offers no guarantee in that regard.

Each issued resistance result represents a specific assembly of a dynamic test laboratory ISO 17025 recognized and accredited according to the requirements of CSA A123.21.

The results should be read, seen and used in their entirety without any changes or substitutions of products or methods.

For equity products, no substitution or other change can not be done without a rigorous analysis according to specific requirements and validated by the Central roofing reference.

The optional products are optional; they do not affect in any way the result insofar as the anchor method is followed.

All terms used in this document such as "Ribbons" are terms that are part of the product technical reference and use in standard testing studied.

All the assembly data represent dynamic test results of roofing systems assembly; the assembly sheets are valid as per the manfacturer technical department keep those active and or, re-evaluations are planned to revise from the original date of the test.

It must be calculating -0.1 kPa (-0.015 psi) as the weaker result, everything bellows like -0.2 kPa (-0.03 psi) are stronger uplift wind resistance.

The Central Roofing Reference can not be held liable for any claim by the manufacturer in relation to the identification and CSA reserves the right to remove without notice and the specifications of the assembly.

This technical data assembly sheet is produce by Central Roof Reference, with copyright and subject to the Quebec legislation. All readers of this data sheet must insure themselves that she’s up to date and that she’s wasn’t avoid nether replace by a recent one. To validate, you must consult the Central Roof Reference website http://www.crt-csa.ca or to communicate with us by mail at info@crt-csa.ca

Please, checkmark the products you want and click the button to generate the pdf with your chosen products only.
Generate The PDF

Minimal Pressure Rate

Security Factor Observed On Test
-4.8 KPA ( -100 PSF ) -7.2 KPA ( -150 PSF )

Assembly Characteristics

Roof System System Type Deck Type
MULTI AARS Wood

Assembly Specifications

Cap Sheet Membrane (Required)

Generic #15 organic felt
Attachment Pattern
Lexuco 2010 corp. Lexcor # 15
Attachment Pattern
Generic Asphalt oxyded
5 plies at 20 lbs / square between plies
Fully Adhered

Cover Board (Required)

BP Canada Corp. BP ESGARD HD roof Insulator 6 sides
Attachment Pattern
Lexuco 2010 corp. Fibrelex
Attachment Pattern
Generic Asphalt oxyded
20 lbs / square
Fully Adhered

Upper Insulation (Required)

Atlas Roofing AC Foam II 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
Atlas Roofing AC Foam III 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
Johns Manville ENRGY 3 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
Johns Manville ENRGY 3 CGF 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
IKO Industries Ltd. IKOTherm
Attachment Pattern
IKO Industries Ltd. IKOTherm III
Attachment Pattern
Lexuco 2010 corp. Isolex
Attachment Pattern
Lexuco 2010 corp. Isolex II
Attachment Pattern
Soprema Sopra-Iso + 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
Soprema Sopra-Iso 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
Generic Asphalt oxyded
20 lbs / square
Fully Adhered

Base Insulation (Required)

Atlas Roofing AC Foam II 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
Atlas Roofing AC Foam III 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
Johns Manville ENRGY 3 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
Johns Manville ENRGY 3 CGF 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
IKO Industries Ltd. IKOTherm
Attachment Pattern
IKO Industries Ltd. IKOTherm III
Attachment Pattern
Lexuco 2010 corp. Isolex
Attachment Pattern
Lexuco 2010 corp. Isolex II
Attachment Pattern
Soprema Sopra-Iso + 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
Soprema Sopra-Iso 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
Generic Asphalt oxyded
20 lbs / square
Fully Adhered

Vapor Barrier (Required)

BP Canada Corp. #15-RF 404 organic felt
Attachment Pattern
Lexuco 2010 corp. Lexcor # 15
Attachment Pattern
Generic Asphalt oxyded
2 plies at 20 lbs / square between plies
Fully Adhered

Decking (Required)

Canwood Plywood 5/8''
Attachment Pattern
Conform to CSA 0121, CSA 0151, CSA 0153 With L/180; 6 kPa (125 psf)
None

Surfacing (Required)

Generic Gravel / Gravier
Attachment Pattern
Generic Asphalt oxyded
60 lbs / square
Fully Adhered
Please, checkmark the products you want and click the button to generate the pdf with your chosen products only.
Generate The PDF