Product Manufacturer Results Reset Search
Assembly Owner: Tremco
The Central roofing reference did not realize any kind of tests and the results mentioned here, either it has carried out checks for accuracy. It offers no guarantee in that regard.
Each issued resistance result represents a specific assembly of a dynamic test laboratory ISO 17025 recognized and accredited according to the requirements of CSA A123.21.
The results should be read, seen and used in their entirety without any changes or substitutions of products or methods.
For equity products, no substitution or other change can not be done without a rigorous analysis according to specific requirements and validated by the Central roofing reference.
The optional products are optional; they do not affect in any way the result insofar as the anchor method is followed.
All terms used in this document such as "Ribbons" are terms that are part of the product technical reference and use in standard testing studied.
All the assembly data represent dynamic test results of roofing systems assembly; the assembly sheets are valid as per the manfacturer technical department keep those active and or, re-evaluations are planned to revise from the original date of the test.
It must be calculating -0.1 kPa (-0.015 psi) as the weaker result, everything bellows like -0.2 kPa (-0.03 psi) are stronger uplift wind resistance.
The Central Roofing Reference can not be held liable for any claim by the manufacturer in relation to the identification and CSA reserves the right to remove without notice and the specifications of the assembly.
This technical data assembly sheet is produce by Central Roof Reference, with copyright and subject to the Quebec legislation. All readers of this data sheet must insure themselves that she’s up to date and that she’s wasn’t avoid nether replace by a recent one. To validate, you must consult the Central Roof Reference website http://www.crt-csa.ca or to communicate with us by mail at info@crt-csa.ca
| Security Factor | Observed On Test |
|---|---|
| -3.4 KPA ( -70 PSF ) | -5.0 KPA ( -105 PSF ) |
| Roof System | System Type | Deck Type |
|---|---|---|
| MONO | AARS | Steel |
| Tremco | TremPly KEE FB |
|---|
| Attachment Pattern |
| Tremco | TremPly KEE, 45 - 80 mil |
|---|
| Attachment Pattern | |||
| Tremco |
TremPly KEE Bonding adhesive
0.5 - 1 gal. / square (depend if FB or not)
|
Fully Adhered | |
| Tremco |
POWERply Endure Bio Adhesive
2.0 gal. / square
|
Fully Adhered | |
| Tremco |
Tremco LR Adhesive
Ribbons / Cordons 4'' o.c. / c.c.
|
Adhered | |
| Royal Adhesives & Sealants |
Millenium PG-1 Pump Grade Adhesive
Ribbons / Cordons 4'' o.c. / c.c.
|
Adhered | |
| ICP Adhesives & Sealants |
Polyset CR-20
Ribbons / Cordons 4'' o.c. / c.c.(or splatter-applied per ICP instructions)
|
Adhered | |
| Tremco | Trisotech G |
|---|
| Attachment Pattern | |||
| Tremco |
Low Rise Foam Insulation Adhesive
Ribbons / Cordons 6'' o.c. / c.c.
|
Adhered | |
| Tremco |
Tremco LR Adhesive
Ribbons / Cordons 6'' o.c. / c.c.
|
Adhered | |
| Royal Adhesives & Sealants |
Millennium One Step
Ribbons / Cordons 6'' o.c. / c.c.
|
Adhered | |
| Royal Adhesives & Sealants |
Millenium PG-1 Pump Grade Adhesive
Ribbons / Cordons 6'' o.c. / c.c.
|
Adhered | |
| Generic |
Asphalt oxyded
25 - 30 lbs / square
|
Fully Adhered | |
| Fransyl | ISOZOL EPS |
|---|
| Attachment Pattern |
| Atlas Roofing | ThermalStar TS |
|---|
| Attachment Pattern | |||
| Tremco |
Low Rise Foam Insulation Adhesive
Ribbons / Cordons 6'' o.c. / c.c.
|
Adhered | |
| Tremco |
Tremco LR Adhesive
Ribbons / Cordons 6'' o.c. / c.c.
|
Adhered | |
| Royal Adhesives & Sealants |
Millennium One Step
Ribbons / Cordons 6'' o.c. / c.c.
|
Adhered | |
| Royal Adhesives & Sealants |
Millenium PG-1 Pump Grade Adhesive
Ribbons / Cordons 6'' o.c. / c.c.
|
Adhered | |
| Tremco | POWERply Standard Smooth |
|---|
| Attachment Pattern | |||
| Generic |
Torched-Applied / Thermosoudé
With ASTM D41 primer at 0.5 gal. / square
|
Welded | |
| Seaman Corporation (FiberTite) | VaporTite |
|---|
| Attachment Pattern | |||
| Generic |
Self-Adhered / Auto collante
With Elastocol Stick Zero at 1.0 gal. / square
|
Fully Adhered | |
| CGC/USG | Structural Panel Concrete Roof Deck |
|---|
| Attachment Pattern | |||
| Tremco |
Tremco LR Adhesive
Ribbons / Cordons 6'' o.c. / c.c.
|
Adhered | |
| Tremco |
Low Rise Foam Insulation Adhesive
Ribbons / Cordons 6'' o.c. / c.c.
|
Adhered | |
| Royal Adhesives & Sealants |
Millennium One Step
Ribbons / Cordons 6'' o.c. / c.c.
|
Adhered | |
| Royal Adhesives & Sealants |
Millenium PG-1 Pump Grade Adhesive
Ribbons / Cordons 6'' o.c. / c.c.
|
Adhered | |
| Generic | Béton structural / Concrete min 2,500 psi |
|---|
| Attachment Pattern | |||
| If concrete/béton no need of coverboard / pas besoin de panneau support | None | ||
| Generic | Steel min. 22 MSG and min. yield strength 40 ksi |
|---|
| Attachment Pattern |
