Product Manufacturer Results Reset Search


1553-A- Protectobase 180-MA12/36-MARS016-A

Assembly Owner: IKO Industries Ltd.

Terms and Conditions

The Central roofing reference did not realize any kind of tests and the results mentioned here, either it has carried out checks for accuracy. It offers no guarantee in that regard.

Each issued resistance result represents a specific assembly of a dynamic test laboratory ISO 17025 recognized and accredited according to the requirements of CSA A123.21.

The results should be read, seen and used in their entirety without any changes or substitutions of products or methods.

For equity products, no substitution or other change can not be done without a rigorous analysis according to specific requirements and validated by the Central roofing reference.

The optional products are optional; they do not affect in any way the result insofar as the anchor method is followed.

All terms used in this document such as "Ribbons" are terms that are part of the product technical reference and use in standard testing studied.

All the assembly data represent dynamic test results of roofing systems assembly; the assembly sheets are valid as per the manfacturer technical department keep those active and or, re-evaluations are planned to revise from the original date of the test.

It must be calculating -0.1 kPa (-0.015 psi) as the weaker result, everything bellows like -0.2 kPa (-0.03 psi) are stronger uplift wind resistance.

The Central Roofing Reference can not be held liable for any claim by the manufacturer in relation to the identification and CSA reserves the right to remove without notice and the specifications of the assembly.

This technical data assembly sheet is produce by Central Roof Reference, with copyright and subject to the Quebec legislation. All readers of this data sheet must insure themselves that she’s up to date and that she’s wasn’t avoid nether replace by a recent one. To validate, you must consult the Central Roof Reference website http://www.crt-csa.ca or to communicate with us by mail at info@crt-csa.ca

Please, checkmark the products you want and click the button to generate the pdf with your chosen products only.
Generate The PDF

Minimal Pressure Rate

Security Factor Observed On Test
-5.4 KPA ( -112 PSF ) -8.0 KPA ( -168 PSF )

Assembly Characteristics

Roof System System Type Deck Type
BIC MARS Steel

Assembly Specifications

Cap Sheet Membrane (Required)

IKO Industries Ltd. Armourcool Granular Prevent Premium TP-HD
Attachment Pattern
IKO Industries Ltd. Armourcool Granular Prevent TP-HD
Attachment Pattern
IKO Industries Ltd. Armourcool Granular TP
Attachment Pattern
IKO Industries Ltd. Armourcool Granular TP-HD
Attachment Pattern
IKO Industries Ltd. Carrara ArmourCool 250
Attachment Pattern
IKO Industries Ltd. Modiflex MP-180 Cap
Attachment Pattern
IKO Industries Ltd. Modiflex MP-250 Cap
Attachment Pattern
IKO Industries Ltd. Modiflex MP-HD FS
Attachment Pattern
IKO Industries Ltd. Torchflex Prevent Premium TP-250
Attachment Pattern
IKO Industries Ltd. Torchflex TP-180 Cap
Attachment Pattern
IKO Industries Ltd. Torchflex TP-250 Cap
Attachment Pattern
IKO Industries Ltd. Torchflex TP-HD
Attachment Pattern
IKO Industries Ltd. Torchflex TPQ-250 Cap
Attachment Pattern
Generic Torched-Applied / Thermosoudé
Welded

Base Sheet Membrane (Required)

IKO Industries Ltd. CoverShield Base 180
Attachment Pattern
IKO Industries Ltd. ProtectoBase 180
Attachment Pattern
Trufast #14 DP pre assembled with 61 mm (2.4") Metal plate
914 mm (36'') spacing & 305 mm (12'') o.c.
Mechanically Attached

Upper Insulation (Required)

IKO Industries Ltd. IKOTherm
Attachment Pattern
IKO Industries Ltd. IKOtherm 25 psi
Attachment Pattern
Generic #12 pre-assembled 3" plates
1 fastener per 8 sq.ft (4 per 4x8 board)
Mechanically Attached
IKO Industries Ltd. IKOTherm III
Attachment Pattern
IKO Industries Ltd. IKOTherm III 25 psi
Attachment Pattern
IKO Industries Ltd. IKOTherm Tapered
Attachment Pattern
IKO Industries Ltd. IKOTherm Tapered 25 psi
Attachment Pattern

Base Insulation (Required)

IKO Industries Ltd. IKOTherm
Attachment Pattern
IKO Industries Ltd. IKOtherm 25 psi
Attachment Pattern
Generic Loose laid / en indépendance
Independance
IKO Industries Ltd. IKOTherm III
Attachment Pattern
IKO Industries Ltd. IKOTherm III 25 psi
Attachment Pattern
IKO Industries Ltd. IKOTherm Tapered
Attachment Pattern
IKO Industries Ltd. IKOTherm Tapered 25 psi
Attachment Pattern

Vapor Barrier (Required)

IKO Industries Ltd. MVP Vapour Retarder
Attachment Pattern
Generic Self-Adhered / Auto collante
Adhered

Thermal Barrier (Optional)

Generic Any UL Classified any Thickness
Attachment Pattern
Generic Loose laid / en indépendance
Independance
Generic See manufacturer / Voir manufacturier
Adhered
Generic See manufacturer / Voir manufacturier
Mechanically Attached

Decking (Required)

Generic Steel min. 22 MSG and min. yield strength 40 ksi
Attachment Pattern
Please, checkmark the products you want and click the button to generate the pdf with your chosen products only.
Generate The PDF