Product Manufacturer Results Reset Search


1279-A-Polyglass HT Base TA + CB AD12 - TGFY7.R14571 #2 to 17

Assembly Owner: Polyglass USA inc.

Terms and Conditions

The Central roofing reference did not realize any kind of tests and the results mentioned here, either it has carried out checks for accuracy. It offers no guarantee in that regard.

Each issued resistance result represents a specific assembly of a dynamic test laboratory ISO 17025 recognized and accredited according to the requirements of CSA A123.21.

The results should be read, seen and used in their entirety without any changes or substitutions of products or methods.

For equity products, no substitution or other change can not be done without a rigorous analysis according to specific requirements and validated by the Central roofing reference.

The optional products are optional; they do not affect in any way the result insofar as the anchor method is followed.

All terms used in this document such as "Ribbons" are terms that are part of the product technical reference and use in standard testing studied.

All the assembly data represent dynamic test results of roofing systems assembly; the assembly sheets are valid as per the manfacturer technical department keep those active and or, re-evaluations are planned to revise from the original date of the test.

It must be calculating -0.1 kPa (-0.015 psi) as the weaker result, everything bellows like -0.2 kPa (-0.03 psi) are stronger uplift wind resistance.

The Central Roofing Reference can not be held liable for any claim by the manufacturer in relation to the identification and CSA reserves the right to remove without notice and the specifications of the assembly.

This technical data assembly sheet is produce by Central Roof Reference, with copyright and subject to the Quebec legislation. All readers of this data sheet must insure themselves that she’s up to date and that she’s wasn’t avoid nether replace by a recent one. To validate, you must consult the Central Roof Reference website http://www.crt-csa.ca or to communicate with us by mail at info@crt-csa.ca

Please, checkmark the products you want and click the button to generate the pdf with your chosen products only.
Generate The PDF

Minimal Pressure Rate

Security Factor Observed On Test
-3.1 KPA ( -64 PSF ) -4.6 KPA ( -96 PSF )

Assembly Characteristics

Roof System System Type Deck Type
BIC PARS Steel

Assembly Specifications

Cap Sheet Membrane (Required)

Polyglass USA inc. Elastoflex S6 G
Attachment Pattern
Polyglass USA inc. Elastoflex S6 G FR
Attachment Pattern
Polyglass USA inc. Elastoflex VG FR
Attachment Pattern
Polyglass USA inc. Elastoshield TS G FR
Attachment Pattern
Polyglass USA inc. Elastoshield TS-G
Attachment Pattern
Polyglass USA inc. Modibond G
Attachment Pattern
Polyglass USA inc. Polybond
Attachment Pattern
Polyglass USA inc. Polybond G
Attachment Pattern
Polyglass USA inc. Polyflex
Attachment Pattern
Polyglass USA inc. Polyflex G
Attachment Pattern
Polyglass USA inc. Polyflex G FR
Attachment Pattern
Generic Torched-Applied / Thermosoudé
Welded
Polyglass USA inc. PolyFresko G
Attachment Pattern
Polyglass USA inc. PolyFresko G FR
Attachment Pattern
Polyglass USA inc. PolyFresko G SBS
Attachment Pattern
Polyglass USA inc. PolyFresko G SBS FR
Attachment Pattern

Base Sheet Membrane (Required)

Polyglass USA inc. Elastoflex SA V Base Vent
Attachment Pattern
Polyglass USA inc. Elastoflex SA V FR Base Vent
Attachment Pattern
Polyglass USA inc. Elastoflex SA V Plus
Attachment Pattern
Polyglass USA inc. Elastoflex SA V Plus FR
Attachment Pattern
Polyglass USA inc. PolyFlex SA Base
Attachment Pattern
Generic Self-Adhered / Auto collante
Or any Ply Sheet torch-applied
Fully Adhered

Cover Board (Required)

Georgia-Pacific Gypsum DensDeck Prime 1200 mm x 2440 mm x 6.4 mm (4' x 8' x 1/4")
Attachment Pattern
National Gypsum DEXcell Cement Roof Board
Attachment Pattern
National Gypsum DEXcell FA Glass Mat Roof Board
Attachment Pattern
CGC/USG Securock Cement Roof Board
Attachment Pattern
CGC/USG Securock Gypsum Fiber Roof Board 6.3 mm (1/4") - 17.9 mm (5/8")
Attachment Pattern
DOW Chemical Insta-Stik Quik Set
Ribbons / Cordons 12'' o.c. / c.c. Optional Primer - Polygalss WB-3000
Adhered
Royal Adhesives & Sealants Millennium One Step
Ribbons / Cordons 12'' o.c. / c.c. Optional Primer - Polygalss WB-3000
Adhered
Royal Adhesives & Sealants Millenium PG-1 Pump Grade Adhesive
Ribbons / Cordons 12'' o.c. / c.c. Optional Primer - Polygalss WB-3000
Adhered
OMG Olybond 500
Ribbons / Cordons 12'' o.c. / c.c. Optional Primer - Polygalss WB-3000
Adhered

Base Insulation (Required)

Atlas Roofing AC Foam II 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
GAF EnergyGuard Polyiso Insulation
Attachment Pattern
Johns Manville ENRGY 3 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
Hunter Panels H-Shield 25mm (1’’) à 203.2 mm (8’’)
Attachment Pattern
Trufast #12 DP pre assembled with 76 mm (3") Metal Insulation plates
1 fastener per 3.2 ft.sq. / 1 ancrage par 3.2 pi.c.a. (10 / 32 ft.sq./pi.ca.)
Mechanically Attached
Rmax inc. Multi-Max FA-3
Attachment Pattern
OMG #12 Roofgrip with 3'' metal plate
1 fastener per 3.2 ft.sq. / 1 ancrage par 3.2 pi.c.a. (10 / 32 ft.sq./pi.ca.)
Mechanically Attached

Vapor Barrier (Required)

Polyglass USA inc. SPAR-Marathon Vapor Barrier
Attachment Pattern
Generic Loose laid / en indépendance
Independance

Thermal Barrier (Optional)

Georgia-Pacific Gypsum DensDeck 1200 mm x 2440 mm x 12.7 mm (4' x 8' x 1/2")
Attachment Pattern
Georgia-Pacific Gypsum DensDeck Prime 1200 mm x 2440 mm x 6.4 mm (4' x 8' x 1/4")
Attachment Pattern
Generic Gypsum roof board (1.22 m x 2.44 m 15.9 mm (4 ft x 8 ft x 5/8 in.))
Attachment Pattern
CGC/USG Securock Cement Roof Board
Attachment Pattern
CGC/USG Securock Gypsum Fiber Roof Board 6.3 mm (1/4") - 17.9 mm (5/8")
Attachment Pattern
Generic Loose laid / en indépendance
Independance
Generic See manufacturer / Voir manufacturier
Adhered
Generic See manufacturer / Voir manufacturier
Mechanically Attached

Decking (Required)

Generic Steel min. 22 MSG and min. yield strength 40 ksi
Attachment Pattern

Ply Sheet (Required)

Polyglass USA inc. Elastobase
Attachment Pattern
Polyglass USA inc. Elastoflex S6
Attachment Pattern
Polyglass USA inc. Elastoflex S6 22
Attachment Pattern
Polyglass USA inc. Elastoflex S6 25
Attachment Pattern
Polyglass USA inc. Elastoflex V
Attachment Pattern
Polyglass USA inc. Polybond
Attachment Pattern
Polyglass USA inc. Polyflex
Attachment Pattern
Polyglass USA inc. Polyglass HT Base 650
Attachment Pattern
Generic Torched-Applied / Thermosoudé
Welded
Please, checkmark the products you want and click the button to generate the pdf with your chosen products only.
Generate The PDF